If you’re major about astronomy these days, you want to have a computer controlled telescope. Although you can easily purchase a pre-made cable television that connects the two devices, where’s the fun in that? [Charles], being an avid Maker, has created a good step by step guide so you can build your own.

This is a great weekend project, and one that even a novice electronics hobbyist ought to be able to tackle. It’s straight forward, rather quick, and very easy. strip some insulation off both ends of the cable, then cut off the unneeded wires. (You’ll only be working with three of them.) Prep everything with heat shrink tubing. Crimp one end of the wires into an RJ10 plug, then solder the other end of the wires into a DB9 connector. protected the heat shrink tubing in place, attach the housings, and you can call it finished!

[Charles] said the whole procedure only took him around 15 minutes. total cost? less than $17 in parts.